2014年10月20日星期一

To advoid blocking the water route of chiller ,please select distilled water

To advoid blocking the water route of chiller and extend the chiller's life, please select distilled water and not tap water.
How long does the cooling water in the chiller need to be renewed?
The frequency of changing the water in the chiller depends on the actual working condition. S&A chiller is closed water loop type. Normally the cooling water need to be renewed every 6months or 12 months if the working environment is clean like laboratory. But if the environment condition is worse like cooling cnc spindle, it is necessary to change the water every 2 months or even shorter on the basis of the water quality.
TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE: teyuchiller
water chiller

Why are there some bubbles in the pipe of water cooler

When the power switch turned on, the circulation pump of the chiller started working. The first time of operating may cause more bubble in the pipe leading to a flow alarming occasionally. But running for a few minutes later, it will go back to normal.
If you need more technical support, please feel free to contact us!
Thank you for using the water coolers of S&A!



TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE: teyuchiller
water cooler

Water chiller CW-5000 for a CO2 laser system

S&A CW-5000 is refrigeration type  water chiller of 800W cooling capacity. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. There is 1 water outlet and an inlet, applicable to cool single laser glass tube.
S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. With that 1 key solution, customers no longer need to worry about the water temperature adjustment of seasonal changes.
Features

1. 800W cooling capacity; use environmental refrigerant;

2. Compact size, long working life and simple operation;

3. ±0.3℃ precisely temperature control;

4. The intelligent temperature controller has 2 control modes, applicable to different applied occasions;  with various setting and display functions;

5. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;

6. Multiple power specifications; CE approval;RoHS approval;
7. Optional heater and water filter.
Specification
One-stop automatic intelligent temperature control: in different environment, user does not need to change setting due to it will automatically switch 
to appropriate operating temperature. 
CW-5000AG: applied to cool a single 80W CO2 laser tube (emitting rate higher than 60%);
CW-5000AH: applied to cool a single 5KW spindle or welding equipment;
CW-5000AI : applied to cool a single 5W-10W solid-state laser. 


TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE: teyuchiller


2014年10月16日星期四

How much is the temperature difference between indoor and outdoor than can cause condensate water

When the temperature difference in between indoor and outdoor is 10 degree, that may cause condensate water on the CO2 glass laser tube. To avoid the condensate water, pleas choose S&A water cooler!
S&A water cooler has 2 temperature control models as constant temperature and intelligent temperature control. The constant temperature control is available for manual adjustment. However, under the intelligent temperature control, the water cooler can automatically adjust water temperature with the ambient changes. Usually, the water temperature will be 2℃ lower then the ambient, to avoid the condensate water for temperature change.



TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE: teyuchiller
water cooler

S&A water cooler for UV-LED flatted printer

Generally speaking, when the difference in between water temperature and ambient is degree, it is easy to produce condensate water for the cooling machine, that may damage the machine. To avoid the condensate water, pleas choose S&A water cooler!

S&A water cooler has 2 temperature control models as constant temperature and intelligent temperature control. The constant temperature control is available for manual adjustment. However, under the intelligent temperature control, the water cooler can automatically adjust water temperature with the ambient changes. Usually, the water temperature will be 2℃ lower then the ambient, to avoid the condensate water for temperature change.

Recently, A customer purchased water cooler CW-5200 to cool UV-LED flatted printer. He found condensate water occurring in his machine when the chiller was running. That is because CW-5200 is selected constant temperature model as factory setting with water temperature at 25℃.

As a result, we suggest the customer change the constant temperature control to the intelligent mode to avoid the condensate water and presently, the customer is very satisfied with the chiller performance.
How to set the intelligent temperature control:
http://www.teyuchiller.com/Article/Howtochangertheintel_1.html



TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE: teyuchiller
UV water cooler

S&A water cooler show you how to avoid the condensate water

Generally speaking, when the difference in between water temperature and ambient is degree, it is easy to produce condensate water for the cooling machine, that may damage the machine. To avoid the condensate water, pleas choose S&A water cooler!

S&A water cooler has 2 temperature control models as constant temperature and intelligent temperature control. The constant temperature control is available for manual adjustment. However, under the intelligent temperature control, the water cooler can automatically adjust water temperature with the ambient changes. Usually, the water temperature will be 2℃ lower then the ambient, to avoid the condensate water for temperature change.

Recently, A customer purchased water cooler CW-5200 to cool UV-LED flatted printer. He found condensate water occurring in his machine when the chiller was running. That is because CW-5200 is selected constant temperature model as factory setting with water temperature at 25℃.

As a result, we suggest the customer change the constant temperature control to the intelligent mode to avoid the condensate water and presently, the customer is very satisfied with the chiller performance.

How to set the intelligent temperature control: http://www.teyuchiller.com/Article/Howtochangertheintel_1.html
 

TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE: teyuchiller

2014年10月15日星期三

Air cooled water chiller for cooling TIG welding machine

The customers request a chiller has 5.5KW cooling capacity to cool TIG welding machine when the ambient temperature is 30℃ and water temperature is 20℃ And he is interesting in CW-6000AN.

But we choose CW-6300AN250S for him.

Because the cooling capacity of CW-6000AN doesn't reach customer's requirement .
CW-6300 air cooled water chiller has 8500W cooling capacity, high water pressure and large flow, with multiple alarm functions such as compressor time-delay protection, compressor overcurrent protection,.

More about CW-6300 chiller's parameter: http://www.teyuchiller.com/Products/ChillerCW63008500Wco.html



TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE: teyuchiller
air cooled water chiller