industrial water chiller,CO2 laser chiller,water-cooled chiller-S&A

2014年8月14日星期四

What is the difference between CW-3000 and CW-5000 chiller

S&A CW-3000 is thermolysis type industrial water cooler. It’s mainly used on the equipment for heat exchange between the heat and the air environment. The water temperature of CW-3000 cooler is related to ambient temperature, so its thermostat is not manually adjusted. This cooler is widely used by laser industry equipment manufacturers for its small size, easy mobility and simple installation and operation. In addition, to protect the laser device, CW-3000 cooler is not only equipped with anti-clogging heat exchanger, also has water flow detection alarm and ultra-high temperature alarm as protection, and with low power consumption, it has extremely hight cost performance compared with the same types of products.

S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. There is 1 water outlet and an inlet, applicable to cool single laser glass tube.

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:marketing@teyuchiller.com

Website: http://www.teyuchiller.com

2014年8月11日星期一

380V60HZ CW-7800FT laser chiller for 2000W fiber laser machine

S&A laser chiller CW-7800FT (380V, 60HZ, 19kw cooling capacity) has been produced already, it will be packed in plywood crate and sent to Korea.

CW-7800FT is dual temperature and dual pump type laser chiller which is applied to cool 2000w fiber laser machine.

The good temperature stability (±1℃), high water pressure (53M) and large water flow (116LPM）of CW-7800FT should satisfy the cooling demand of fiber laser machine. Specially, CW-7800FT has dual water cooling system( one for cooling fiber laser and another for cooling optic lens), multiple use for saving cost, space and manual move, quiteconvenient for the user.

front

back

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:marketing@teyuchiller.com

Website: http://www.teyuchiller.com

How to adjust the water temperature of S&A chiller

Now I show you how to adjust the temperature of S&A water chiller

For exmaple, to set the water temperature at 23℃

1. Press and keep holding ▲and SET buttons

2. Then for 5 seconds and it displays "0"

3. Press ▲ key to switch to "8" and release the key

4. Press "SET" key, and it displays "F0"

5. Press "SET" key again

6. Press▼ to adjust to "23"

7. Press "RST" key to save the modification

Thank you for using S&A chiller!

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:marketing@teyuchiller.com

Website: http://www.teyuchiller.com

How to select air cooled chiller for 100watt Raycus fiber laser

Cooling 100watt Raycus fiber laser, please select S&A CW-5200 water chiller of 1400W cooling capacity with good temperature stability (±1℃), multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm

CW-5200 technical parameter: http://www.teyuchiller.com/Products/ChillerCW52001400Wco.html

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:marketing@teyuchiller.com

Website: http://www.teyuchiller.com

How to select water chiller for 300watt fiber laser cutting machine

Cooling 300watt fiber laser cutting machine, you could select CW-6000 chiller of 2700w cooling capacity to cool fiber laser and thermolysis type CW-3000 chiller to cool optic lense.

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:marketing@teyuchiller.com

Website: http://www.teyuchiller.com

2014年8月5日星期二

How to set constant temperature control of S&A chiller

Please follow below steps to reset the chiller.

1. Restore to factory setting.

Turn off the chiller first. Press and keep holding ▲and▼buttons then turn on the chiller. Do not release the buttons until the controller display rE.

2. To set the temperature:

SET" : enter / exit / confirm

"RST": save and exit (save the modification and exit when you have finished your modification)

▲or▼: to switch item / digit

1) Press ▲ key and hold it, then press "SET" key for 5 seconds until "0" displayed. Meanwhile, press▲key to switch to "8" and release the keys.

After that, press "SET" key, and it displays "F0".

2) Press ▲ to turn to "F3" and press "SET" key, and then press ▲or ▼ to adjust "1" to "0". Next press "SET" key to confirm and exit.

3) Press ▲or▼ to turn to "F0" and press ▲or ▼ to adjust "25" (supposing this is the temp. you want). Next press "SET" key to confirm and save it.

4) Press ▲or▼ to turn to "F9" and press ▲or ▼ to adjust "22" or other you need (F9 value must be lower than F0, if not the chiller will stop refrigerating when the temp reached F0 value). At last, press "RST" key to save all the modification and exit menu.